Manasota Optics, Inc.
1743 Northgate Blvd
Sarasota, FL 34234

Telephone (941) 359-1748
Fax (941) 359-0279
© 2009-2014 Manasota Optics, Inc.

No material from this web site may
be used without the expressed written
permission from Manasota Optics, Inc.


Zygo® GPI-XP Phase Shift Interferometer
Capable of measuring up to 6” diameter area

Zygo® 6" Dynaflect Transmission Flat

Zygo® 4" Transmission Flat

Zygo® Transmission Sphere f/0.75
Zygo® Transmission Sphere f/1.5
Zygo® Transmission Sphere f/3.3
Zygo® Transmission Sphere f/7.2

Zygo® Mark II Interferometer with radius slide attachment

(2) Zygo® 4-6" Beam Expanders

Newport
® 18' Isolation Table

Davidson
® D-305L Interferometer

For Larger Optics:
18" Collimating Lens, OSTI
Davidson 16" Optical Flat
Richey Commons Sphere

Perkin Elmer Lambda 950 Spectrophotometer with URA
Attachment (Absolute Reflectance Measurement)
Reflectivity ranges from 200nm - 3300nm UV to Near IR

Perkin Elmer GX Optica FTIR Spectrophotometer.
Reflectivity ranges from 1 Micron - 25+ Microns
Contains PIKE II Variable Angle Accessory

WYKO NCP-1000 Non-Contact Profilometer with 20X objective

Tenney TC-30 Temperature Thermal Chamber with a Watlow F4
Controller and a Honeywell DR4500 Chart Recorder

Blue M Temperature Stress Relieve Chamber with a Watlow F4
Controller and a Honeywell DR4500 Chart Recorder

Cincinnati Sub Zero Bench Top Humidity Chamber with a
Watlow F4 Controller and a Honeywell DR4500 Chart Recorder

Nikon 6D Autocollimator with calibrated angle blocks

Ultradex® - Sub Arc Second Rotary Table

Nikon SMZ-645 Stereo Microscope with stand. 8X-50X
Magnification with calibrated stage micrometer.

Optical clean flow benches as well as black boxes with 40 watt
lighting sources for testing per Military Specifications

A variety of optical tooling with testing lenses (both flat and
spherical), beam expanders, precision granite surface plates,
transmission flats and transmission spheres, half aluminized
scratch/dig standards, and precision angle blocks to hold tight
tolerances to customer specifications

Mechanical test equipment consists of micrometers, calipers,
dial indicators, threaded gage plugs, and go no-go pins.

MOI's mechanical equipment also has precision drop
indicators with displays from Heidenhain (MT-25) as well as
Mitutoyo.

MOI's calibration system follows ANSI Z540.3 & ISO10012
A View of our 18' Newport Isolation
Table
Zygo® Mark II Interferometer with
radius slide attachment
Optical Flow Bench with Half Aluminized
Brysen Optical Scratch Dig Standards
Zygo® GPI XP with 6" Dynaflect
Transmission Flat